1-5 of 5 results  for:

  • Popular Music x
  • Chordophones (Stringed Instruments) x
Clear all

Article

Allison A. Alcorn

[slide guitar]

Style of playing either acoustic or electric guitar. The guitarist places a tube on one left-hand finger, usually the pinky, and presses this ‘slide’ onto the steel string to vary pitch. The slide is moved along the string without lifting, creating portamento from pitch to pitch. In this style, the guitar’s frets become nonfunctional, though some guitarists use their free fingers to fret as well. ‘Bottleneck’ refers to the neck of a glass bottle, originally used for the slides. Modern slides can be made of glass, glass on the outside and ceramic on the inside to prevent slipping, or non-shattering material such as brass or polyvinyl chloride (PVC) pipe. The material of the slide affects the timbre; for instance, heavier glass produces a richer, fuller tone, while the iron oxide in green glass creates a loud, sharp tone that is still warmer than cobalt oxide in blue glass. Metals, which generate a very bright tone, are used mostly with electric guitars. In bottleneck playing the guitar is held in the usual guitar position, whereas the lap slide guitar is played belly up, back flat on the player’s lap....

Article

Buzuq  

Scheherazade Qassim Hassan

Long-necked lute, probably of late Ottoman origin, introduced during the 20th century to urban Arab centres in Iraq, Syria, and the Lebanon. The soundbox resembles that of the classical ‘ūd. The neck has 24 movable frets, and the two or three strings are tuned in 4ths. Originally used by Kurds, Turkmen, and some Roma musicians, it is now used also by Arabs to accompany songs and for classical Arab ...

Article

Richard Johnston

Guitar, mandolin, and ukulele manufacturer. It was founded in Houston, Texas, in 1976, by Bill Collings (b Aug 9, 1948; d Austin, TX, July 14, 2017), who had moved from Ohio to Texas following a failed attempt at medical school. After building a few guitars and some banjos, Collings moved to Austin in 1979. His background as a machinist led him to emphasize precise jigs and fixtures even when he was working out of a small single-car garage. Demand for Collings guitars, specifically for updated versions of Martin and Gibson flat-top styles from the 1930s, prompted his move to a 1,000-square-foot shop in 1989. Two woodworkers were hired, including Bruce Van Wart, who is still in charge of wood selection and top voicing on the firm’s acoustic guitars. By this time, production had increased to a level that allowed sales to a few retailers.

In late 1991 the company relocated to a much larger facility on the outskirts of Austin, and the number of Collings guitar models, and employees, began to grow. Bill Collings was one of the first flat-top guitar builders to offer fully carved arch-top models as well. These deluxe jazz guitars were quickly accepted as the equals of those from premier American builders, and they sold for similar prices; but only a few were completed each year. Collings was also one of the first small, independent guitar companies to incorporate CNC (computer numerical control) carving machines for building both guitar parts and the precise tooling to aid in their assembly, which is still done by hand. One of the signature differences between the Collings models and the Gibson and Martin originals that inspired them is that Collings uses an unglued bolted mortise and tenon neck joint, rather than a traditional dovetail....

Article

J. Richard Haefer

[juspeña, guitarra quinta]

Five-stringed guitar of Mexico, probably originating in the Tecalitlán area of Jalisco. It was one of the earliest mariachi instruments. It is also colloquially known as quinta or jarana (not to be confused with the jarana huasteca or jarana jarocha). Typically it has a soundbox 33 cm long, 31 cm wide (maximum), and 11 cm deep; a 32 cm neck (4 cm of the fingerboard overlapping flat on the soundboard) with 12 metal frets; and 56 cm string length. The soundhole is decorated with nácar (mother-of-pearl) and wood inlay in a starburst pattern, and the purfling has intricate limoncillo wood inlay. The five wooden pegs are inserted from the rear of the pegboard, which has distinctively curved sides and two open f-holes between the pegs. The woods used to build golpes are the same as those for guitarrones.

Tunings used nowadays including the following: d–g–b–e–a (used by Gaspar Vargas); ...

Article

J. Richard Haefer

Large guitar of Mexico. It is played as the bass instrument in mariachi and other Mexican ensembles. The guitarrón mexicano (literally ‘large Mexican guitar’) is shaped like a guitar but with deep sides and a V-arched back. Typically it has a soundbox 63 cm long with a 48 cm maximum width and maximum depth of 21 cm at the sides plus an additional 9 cm to the apex of the back. The fretless neck terminates in a pegboard with pegs inserted from the rear. A 10 cm soundhole on the ...